Sikkens Cetol Deck

For the best!
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Translucent Satin finish
  • Oil based
  • Easy application
  • UV, physcial wear and weather resistant
  • Wood grain remains visible after application
  • Microporous: allowing the timber to breathe while repelling unwanted moisture
Technical Information
  • Finish Satin Finish
  • Coverage Approx. 8-10m2/Litre
  • Thinning None. Ready for use after thorough stirring. Apply liberally in the direction of the grain using a good quality brush for optimum penetration. DO NOT use rollers or applicators.
Product Features
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Wood grain remains visible after application
  • UV, physcial wear and weather resistant
  • Easy application
  • Oil based

Product Description

A highly water repellent, weather resistant, medium build transparent coating for exterior timber decks and handrails. On new or bare wood, used as two finishing coats over a priming coat of Sikkens Cetol HLSe providing UV resistance and durability.

Application Description

Ready to use with no need to thin. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container or finish in a corner before starting the new can to ensure colour consistency. On previously stained decking, touch up bare areas with Sikkens Cetol HLSe and allow to dry before finishing with further coats. Avoid heavy wear and tear on the decking for a few days after application. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. On correctly prepared surfaces, apply two coats evenly with a good quality brush along the grain, avoiding overlaps. Allow 24 hours between coats.

Technical & Safety Documentation

Flammable liquid and vapour. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Download Adobe Reader

System information

On bare wood- Sikkens Cetol HLSe (one coat) + Sikkens Cetol Deck (two coats). For subsequent maintenance- one or two coats of Cetol Deck.

Tips & Advice

  • 1. Preparing the Surfaces
    Surface Description: Hardwood and softwood decking including Treated Pine, Merbau, Spotted Gum and Jarrah.
    Preparation and application advice:
    Step 1: Ensure the timber to be treated is clean, dry and free from any dirt or loose debris. New Timber: New tannin-rich timbers should be allowed to season first or rough sanded and treated with Sikkens Cetol BL Tannin & Oil Remover to encourage oils and tannins to be drawn to the surface. Older Timber: Sand back to bare all flaking, peeling, and weathered coating. If the existing stain finish is in good condition or the timber has uniformly weathered (turned grey) with no visible finish, then sanding is not essential; move to the next step.
    Step 2: Cean the timber with Sikkens Cetol BL Deck & Wood Cleaner. Rinse and allow to dry thoroughly. For previously stained timber with an intact finish, for best results, light sanding is recommended. Remove sanding dust.
    Step 3: Apply Sikkens Cetol Deck
    Stir the can well before and frequently during use. Brush on evenly along the grain. Apply a second coat after 24 hours. Do not allow puddles to form. Back brush the excess for a uniform finish.
  • 2. Cleaning
    Remove as much stain as possible from equipment before cleaning with white spirit. Do not use or store in extremes of temperature.
  • 3. Storing
    Store in a well-ventilated place. Keep cool.Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Eliminate all ignition sources. Separate from oxidising materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Sikkens Cetol Deck

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...