No Colour Selected

Sikkens Cetol Filter 7 Plus

For the best!
Select a Colour
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Translucent Satin finish
  • Oil based
  • Simple maintenance
  • UV and weather resistant
  • Wood grain remains visible after application
  • Flexible coating which expands and contracts with the timber
Technical Information
  • Finish Satin Finish
  • Coverage Smooth approx 10-16m2/Litre Rough approx 6-8m2/Litre
  • Thinning None. Ready for use after thorough stirring.
Product Features
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Flexible coating which expands and contracts with the timber
  • Wood grain remains visible after application
  • UV and weather resistant
  • Simple maintenance
  • Oil based

Product Description

A superior UV resistant oil based coloured finish for windows, doors, fascias and cladding. It remains flexible as timber moves and provides extra protection for timber exposed to maximum weathering. Not suitable for any walk on surfaces or seating. Must be used over a priming coat of Sikkens Cetol HLSe.

Application Description

Ready to use with no need to thin. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container for colour consistency. New bare timber needs sanding, cleaning and priming with Cetol HLSe. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. On correctly prepared surfaces, apply two coats of Cetol Filter 7 Plus evenly with a good quality brush along the grain, avoiding overlaps. Allow 24 hours between coats.

Technical & Safety Documentation

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor/physician if you feel unwell.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Download Adobe Reader

Colour Range

Cetol Colours

System information

Bare wood- 1 coat of Sikkens Cetol HLSe, followed by 2 coats of Sikkens Cetol Filter 7 plus to finish. For subsequent maintenance- one or two coats of Cetol Filter 7 Plus..

Tips & Advice

  • 1. Preparing the Surfaces
    Surface Description: Correctly prepared vertical timber structures. Not suitable for walk-on surfaces and handrails.
    Preparation and application advice:
    Step 1: Ensure the timber to be treated is clean, dry and free from any dirt or loose debris. New Timber: New tannin-rich timbers should be allowed to season first or rough sanded and treated with Sikkens Cetol BL Tannin & Oil Remover to encourage oils and tannins to be drawn to the surface. Older Timber: Sand back to bare all flaking, peeling, and weathered coating. If the existing stain finish is in good condition or the timber has uniformly weathered (turned grey) with no visible finish, then sanding is not essential; move to the next step.
    Step 2: Cean the timber with Sikkens Cetol BL Deck & Wood Cleaner. Rinse and allow to dry thoroughly. For previously stained timber with an intact finish, for best results, light sanding is recommended. Remove sanding dust.
    Step 3: Apply Sikkens Cetol HLSe on all bare areas / on new timber as a basecoat. Allow to dry for 24 hours, then apply two coats of Sikkens Cetol Filter 7 plus, allowing 24 hours between coats. Brush on evenly along the grain. Recommended wet layer thickness is 55 microns per coat.
  • 2. Cleaning
    Remove as much stain as possible from equipment before cleaning with white spirit. Do not use or store in extremes of temperature.
  • 3. Storing
    Store in accordance with local regulations.Keep away from- oxidising agents, strong alkalis, strong acids.Additional information on storage conditionsObserve label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep container tightly closed. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Sikkens Cetol Filter 7 Plus

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...