Sikkens Cetol Supernatural

For the best!
Pine 077
Only 1 Colour is Available
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Satin finish
  • Water-based
  • Simple maintenance
  • Resists blistering, peeling and mould
  • UV and weather-resistant
  • Wood grain remains visible after application
  • The flexible coating which expands and contracts with the timber
Technical Information
  • Finish Low Lustre Satin
  • Coverage Smooth approx 12m2/Litre Rough approx 6-8m2/Litre
  • Thinning Under normal conditions do not thin. Depending on the temperature (extreme high or low) and the substrate (porous or rough sawn timber), the product can be diluted with clean water up to 5%.
Product Features
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • The flexible coating which expands and contracts with the timber
  • Wood grain remains visible after application
  • Resists blistering, peeling and mould
  • Simple maintenance
  • Water-based

Product Description

Sikkens Cetol Supernatural is a water-based, quick drying, medium-build transparent satin topcoat with added UV filters. Designed as the final two finishing coats over Sikkens Cetol HLSe. It remains flexible as timber moves and provides extra protection for timber exposed to maximum weathering.

Application Description

Ready to use. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container to ensure colour consistency. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. One characteristic of waterborne coatings is that they will not form a uniform film or dry properly if air humidity is too high. If rainfall or heavy dew occurs shortly after painting, the coating may appear opaque and remain evident in prolonged wet weather. This effect will disappear once dry / sunny conditions prevail. When first applied, Cetol Supernatural will appear opaque, drying to a transparent finish in approx. 30 minutes.

Technical & Safety Documentation

Combustible liquid Keep out of reach of children. If medical advice is needed, have product container or label at hand. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Download Adobe Reader

Colour Range

Cetol Colours

System information

Bare timber- one coat of Sikkens Cetol HLSe or Sikkens Cetol BLX-Pro, followed by two coats of Cetol Supernatural to finish. Rough sawn wood may be treated with three coats of Cetol Supernatural only. However, we strongly recommend a priming coat of Cetol HLSe for extra UV protection. For subsequent maintenance- one or two coats of Cetol Supernatural.

Tips & Advice

  • 1. Preparing the Surfaces
    Surface Descritpion: Correctly prepared vertical timber structures. Not suitable for walk-on surfaces and handrails.
    Preparation and application advice:
    Step 1: Ensure the timber to be treated is clean, dry and free from any dirt or loose debris. New Timber: New tannin-rich timbers should be allowed to season first or rough sanded and treated with Sikkens Cetol BL Tannin & Oil Remover to encourage oils and tannins to be drawn to the surface. Older Timber: Sand back to bare all flaking, peeling, and weathered coating. If the existing stain finish is in good condition or the timber has uniformly weathered (turned grey) with no visible finish, then sanding is not essential; move to the next step.
    Step 2: Cean the timber with Sikkens Cetol BL Deck & Wood Cleaner. Rinse and allow to dry thoroughly. For previously stained timber with an intact finish, for best results, light sanding is recommended. Remove sanding dust.
    Step 3: Apply Sikkens Cetol HLSe or Cetol BLX-Pro on all bare areas / on new timber as a basecoat. Allow to dry for 24 hours, then apply two coats of Sikkens Cetol Supernatural, allowing 16 hours between coats. Brush on evenly along the grain. Recommended wet layer thickness is 55 microns per coat.
  • 2. Cleaning
    Clean equipment first in water, then in mineral turpentine. Do not use hot water.
  • 3. Storing
    Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Eliminate all ignition sources. Separate from oxidising materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Sikkens Cetol Supernatural

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...