Premium Timber Oil

For The Best!
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Deep penetration
  • No surface film: natural naked look and matt finish
  • Simple maintenance: eroded naturally by the weather
  • UV and weather resistant
Technical Information
  • Finish N/A
  • Coverage Approx. 10-12m2/Litre
  • Drying Time Dust dry after approx. 2 hours / tack free after approx. 5 hours.
  • Recoatable Recoat from 12 hours
  • Thinning None. Ready for use after thorough stirring (thinning will reduce UV protection).
Product Features
  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Mould & fungus resistance
  • UV and weather resistant

Product Description

A deep penetrating, preserving timber oil that nourishes, colours and protects exterior timber. Provides a natural matt finish for Merbau, Spotted Gum, Jarrah and Similar hardwoods, as well as softwoods such as Pine, Cedar and Tasmanian Oak. It enhances the grain pattern and appearance and protect by replacing the timber’s natural oils and resins lost through weathering.

Application Description

Ready to use with no need to thin. Stir thoroughly before use. Final colour will depend upon timber type, previous treatment and the number of coats applied. Ensure timber moisture content is below 15%. Do not apply in temperatures below 5℃ and above 35°C, in damp conditions (when relative humidity is above 85%), or if rain or dew is likely before the product has dried. If using more than one can, it is advisable to mix them together in a larger container or finish in a corner before starting the new can to ensure colour consistency. For use on sanded (or seasoned and hence porous), washed, dry bare wood. Avoid heavy wear and tear on the decking for a few days after application. At temperatures below 10°C and when used internally with limited air circulation, the drying process will be delayed. On correctly prepared surfaces, 2 coats evenly with a good quality brush along the grain, avoiding overlaps. Allow a minimum of 12 hours between coats.

Technical & Safety Documentation

Warning. May cause an allergic skin reaction. Causes serious eye irritation. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Wear protective gloves. Wear eye or face protection. Avoid breathing vapor. Wash hands thoroughly after handling. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
Download Adobe Reader

System information

Bare wood- Two coats of Cetol Premium Oil as a standalone finish.

Tips & Advice

  • 1. Preparing the Surfaces
    "Surface Description: Hardwood and softwood decking and other exterior timber including Treated Pine, Victorian Ash, Tasmanian Oak, Blackbutt, Merbau, Spotted Gum and Jarrah.
    Preparation and application advice:
    Step 1: Ensure the timber to be treated is clean, dry and free from any dirt or loose debris. New Timber: New tannin-rich timbers should be allowed to season first or rough sanded and treated with Sikkens Cetol BL Tannin & Oil Remover to encourage oils and tannins to be drawn to the surface. Older Timber: Sand back to bare all flaking, peeling, and weathered coating. If the existing stain finish is in good condition, then DO NOT use this product without sanding back to bare. If the timber has uniformly weathered (turned grey) with no visible finish, then sanding is not essential; move to the next step.
    Step 2: Cean the timber with Sikkens Cetol BL Deck & Wood Cleaner. Rinse and allow to dry thoroughly.
    Step 3: Apply Sikkens Cetol Premium Oil
    Stir the can well before and frequently during use.
  • 2. Cleaning
    Clean brushes and equipment immediately with warm water and soap / washing-up liquid.
  • 3. Storing
    Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10 of the MSDS file) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Add a new job

  • Kitchen
  • Bedroom
  • Living Room

Edit job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save Color

Save to My Workspace

Add to job

Premium Timber Oil

Save to My Workspace

Sorry, we couldn't find any results
Fetching the data, please wait...